Makita 6823 Technical Information page 7

< 7 > Removing and assembling gear housing cover
(Removing)
Loosen pan head screw M4x8. Pulling out gear housing cover from motor housing by approx. 10mm.
Remove gear housing cover from motor housing.
(Assembling)
Assemble gear housing cover on motor housing with being careful not to damage lead wires.
Fasten it on motor housing with pan head screw M4x8.
(see Fig.7 )
Pan head screw M4x8
Motor housing
Fig.7
Gear housing cover
approx. 10mm