< 6 > Makita grease No.1 have to be applied to the parts illustrated below.
(see Fig.6 and Fig.6A.)
(6823TP)
Clutch (4.0 g)
Thread section
Outer surface
Needle bearing
of Spindle
Hole for Pin
(6824TP, 6825TP)
Thread section
Needle bearing
Outer surface
of Spindle
Clutch (4.0 g)
Hole for Pin
Gear section (2.0g)
Thrust needle
bearing
Fig.6
Gear section (2.0g)
Fig.6A
Surface of
Flat washer
Thrust needle
bearing
Surface of
Flat washer