Makita 6823 Instruction Manual

Makita 6823 Instruction Manual

Drywall screwdriver
Hide thumbs Also See for 6823:

Advertisement

INSTRUCTION MANUAL
Drywall Screwdriver
6823
6824
6825
6825R
002604
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita 6823

  • Page 1 INSTRUCTION MANUAL Drywall Screwdriver 6823 6824 6825 6825R 002604 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    AC supply. They are double-insulated in accordance with European Makita Corporation responsible Standard and can, therefore, also be used from sockets manufacturer declare that the following Makita without earth wire. machine(s): ENG102-2 Designation of Machine: Drywall Screwdriver For European countries only Model No./ Type: 6823,6824,6825,6825R...
  • Page 3 Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock.
  • Page 4: Specific Safety Rules

    18. Do not use the power tool if the switch does Always be sure you have a firm footing. not turn it on and off. Any power tool that cannot Be sure no one is below when using the tool in be controlled with the switch is dangerous and high locations.
  • Page 5 CAUTION: Always check the direction of rotation before • 1. Locator operation. Use the reversing switch only after the tool comes • to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. This tool has a reversing switch to change the direction of rotation.
  • Page 6: Operation

    1. Locator And at this time the marking on an end of the 2. Locking sleeve Removable Cord Adapter on the side of power supply cord is aligned to the marking on the other end of the Removable Cord Adapter on the side of connecting to the tool.
  • Page 7: Maintenance

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips Insert bits • Magnetic bit holder • Locator •...
  • Page 8 Makita Corporation Anjo, Aichi, Japan 884237G221...

This manual is also suitable for:

682468256825r

Table of Contents