Weber 3200 Owner's Manual page 29

C) To check for leaks, wet fittings with the soap and
water solution, using a spray bottle, brush or rag. If
bubbles form, or if a bubble grows, there is a leak.
Apply the soap and water solution to the following
connections:
a) Manifold-to-regulator hose connection (7).
b) Regulator-to-cylinder connection (8).
c) Regulator hose-to-regulator connection (9).
m WARNING: If there is a leak at
connections (7, 8 or 9), turn off the gas.
DO NOT OPERATE THE GRILL. Contact
the Customer Service Representative
in your area using the contact
information on our web site. Log onto
www.weber.com.
D) When leak checking is complete, turn gas supply off
at the source and rinse connections with water.
NOTE: Since some leak test solutions, including soap and
water, may be slightly corrosive, all connections should be
rinsed with water after checking for leaks.
Now you are ready to use your grill.
PREPARING TO USE YOUR GRILL
7
8 9
29
WWW.WEBER.COM