Photos; Basic Recording; Taking Photos; Selecting Photo Size And Quality - Canon VIXIA HF10 Instruction Manual

Photos
Refer to this chapter for details on shooting photos - from capturing
and playing back images to printing them.
Basic Recording
1
Set the mode dial to
o.
2
Turn on the camcorder.
•:1:5(1)
You can select the memory to
be used for recording still images
(OJ 33).
3
Press
[PHOTO]
halfway.
• Once the focus is automatically
adjusted,
0 will turn green and
one or more AF frames will appear.
• When you press
[PHoIQJ
on the
wireless controller, the still image is
Taking Photos
loll
ON/OFF
(OJ 26)
recorded after the autofocus is
activated and locked.
4
Press
[PHOTO
I
fully.
The ACCESS indicator will flash as
the still image is being recorded.
o
IMPORTANT
Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the mode
dial.
CD
NOTES
• If the subject is not suitable for
autofocus,
0
turns yellow. Adjust the
focus manually
(OJ
50).
• When the subject is too bright,
"OVEREXP" starts flashing. In such
case, use the optional FS-H37U NO
filter.
Selecting Photo Size and Quality
Still images are recorded as JPG files.
As a general rule, select a larger image
size for higher quality. Select the
[LW 1920x1 080] size for photos with an
aspect ratio of 16:9.
61
I