Canon VIXIA HF10 Instruction Manual page 104

Additional lnforrnation
.:1:1[1)
CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT COMMUNICATE WITH THE BATIERY PACK CONTINUE USING THIS BATIERY PACK?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
•:1:1[1)
CANNOT COpy
- The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete
some recordings on the memory card (Q] 43, 65) or reduce the number of scenes to copy (Q] 60).
CANNOT EDIT
- Cannot move or delete original scenes or scenes in the playlist of the selected memory.
CANNOT EDIT CHECK THE CARD
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder
(Q]
33).
CANNOT ENTER THE STANDBY MODE NOW
- The camcorder cannot enter the standby mode if the remaining battery charge is too low.
CANNOT PLAY BACK
- There is a problem with the memory.
•:1:1[1)
CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT PLAY BACK CHECK THE CARD
- There is a problem with the memory card.
•:1:1[1)
CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder (Q] 33).
CANNOT PLAY THE MOVIES ON THIS CARD
- Movies cannot be played back from a 64 MB or smaller memory card.
CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder
(Q]
33).
CANNOT RECORD
- There is a problem with the memory.
•:1:1[1)
CANNOT RECORD MOVIES IN THE BUILT-IN MEMORY
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder (Q] 33).
CANNOT RECORD MOVIES ON THIS CARD
- Movies cannot be recorded on a 64 MB or smaller memory card.
CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder (Q] 33).
104 - - - - - - - - - - - - - - - - - - - - - - - - - - - -