Asus A7V333 Manual page 16

Connectors
The number of jumpers on the A7V333 is only exceeded by the number of on-board connectors. We have the standard audio I/O
connectors backed by two line-out / line-in headers, both jumpered by default to route the audio signals to the I/O backpanel. A
Digital audio interface is provided in form of the SPDIF header
A back panel bracket featuring the gameport and two USB 2.0 / 1.1 ports acts as substitute for the missing gameport in the ATX I/O
panel.
Other connectors include infrared (SIR + CIR), SMBus, chassis intrusion and thermal sensor. The missing game port can be installed
via the game port connector at the bottom of the PCB, next to the Smart Card Reader header. For those who still need additional
USB ports, the A7V333 features an extra USB1.1 header which is pin-compatible with the USB 2.0 standard so that the bracket
included with the shipping content can be hooked up to either header.
Specialty connectors are the interface for the IEEE 1394a Firewire port and the SD / MS (secure digital and memory stick) smart
media headers that can connect to the appropriate reader. Somewhat surprising is that only 3 fan connectors are found on the board.
In addition, the A7V333 features the proprietary ASUS iPanel Interface as well as the AFPanel (Audio Front Panel)