Mitsubishi Electric MR-385S-W-A Service Manual page 22

OPERATING PROCEDURE
2. Remove parts inside the refrigerator
(1) Remove chilled case door and slide chilled case ,
remove glass shelves of refrigerator room , remove
the control panel
(Photo 6)
(2) Remove lamp cover R
(Photo 6)
(3) Remove screw and rivet , pull the control panel with
to right refrigerator wall.
(Photo 6)
(4) Pick the aluminium tape and sealing tape, remove
PC Board
(Photo 7)
(5) Remove duct R assy, damper thermo is installed
within it.
(Photo 7)
Remove the screw of damper thermo
Caution on assembly
1. Be sure to use new sealing materials and tape for
assembly.
2. Attach the sealing material of refcon assy and
attachthe aluminium tape everytimes for
protective moisture.
Photo 6
Control panel
Thermo dial R
Lamp cover R
PC Board
Photo 7
Sealing tape
Aluminium tape
- 21 -
PHOTOS
Rivets
Screws
Duct R assy
Thermo dial F