Mitsubishi Electric MR-385S-W-A Service Manual page 23

Home refrigerators
Table of Contents

Advertisement

3. Removing the compressor
(1) Detach the drain pan.
Compressor
(2) Collect gas from the charge pipe on the high pressure side.
(3) After collecting gas, cut the charge pipe on the low pressure side.
(4) Detach the welded section of the discharge pipe and suction pipe
(5) Replace the compressor and the dryer at a time. (The dryer should be the one packed with the compressor.)
CAUTION ON ASSEMBLY
After replacing the compressor be sure to evacuate the refrigerating cycle and charge gas into the charge pipe.
After replacement check cooling operation and check the weld for gas leaking.
Fig<MR-385S/SL,420S,455S>
w
Charge pipe
OPERATING PROCEDURE
U Washer
: This mark shows welding point.
w
- 22 -
Discharge pipe
w
(High pressure side)
Suction pipe
w
Binder
Dryer

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents