Use A Conditional Access Module; Dvi-Hdmi Cable; Hdmi Cable With An Hdmi-Dvi Adaptor; Insert And Activate A Cam - Philips 22PFL5604D/12 User Manual

•
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
/ HDMI 2
•
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
/ HDMI 2
•
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
VGA
34
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
•
If required, refer to documentation from your
DVI
operator on how to insert a smart card into
the Conditional Access Module.
•
Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
Switch off the TV.
Following the directions printed on the
CAM, gently insert the CAM into the
DVI
the TV.
Push the CAM in as far as it will go.
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
VGA
CAM will deactivate digital services.
After inserting and activating the CAM,
press
at the side of
( ).