Use A Conditional Access Module - Philips 47PFL4606H User Manual

Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
‡ Refer to the documentation from your service
operator on how to insert a smart card into
the Conditional Access Module.
Insert and activate a CAM
Caution
‡
Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1
Switch off the TV and disconnect it from
the power outlet.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3
Push the CAM in as far as it will go.
4
Reconnect the TV to the power outlet.
5
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM
from the slot when in use — this action
deactivates digital services.
38 EN
Access CAM services
1
Insert and activate the CAM (see 'Insert
and activate a CAM' on page 38).
2
Press OPTIONS.
3
Select [Common interface].
» Applications provided by the digital TV
service operator are displayed.
Note
‡
This menu option is available only if the CAM
is inserted and activated correctly.