Table of Contents
Advertisement
Press
.
»
Your picture is stored as the default
Scenea picture in your TV.
Disconnect the USB storage device. The
device can be disconnected safely while
the TV is on.
Follow the instructions to display your
personalised Scenea picture (see 'Display
a single picture with Scenea' on page 22).
•
If the TV is reset to factory settings, your
personalised Scenea picture is removed
from the TV. Repeat these instructions to
personalise the Scenea picture again.
While the TV is on, connect the USB
storage device containing your pictures
(JPEG format only) to the USB connector
at the side of your TV.
»
The home menu appears.
Press
.
»
All pictures in your USB storage device
are displayed in a slideshow, starting
from the default Scenea picture stored
in your TV.
Press any key except
or
to return to normal TV
viewing.
By default, your TV displays the Scenea picture
or slideshow for 120 minutes before entering
standby mode. If sleeptimer is enabled, the
Scenea picture or slideshow is displayed for
the duration of the sleeptimer (see 'Use
timers' on page 17).
(
)
Using Eco mode with Scenea saves energy by
lowering the TV brightness when a Scenea
picture or a slideshow is displayed.
While a Scenea picture or slideshow is
displayed, press
»
The
Press
to select
Press
.
»
Eco mode with Scenea is enabled.
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
When watching TV, press
the channel grid.
Press
Press
to select
.
»
The radio channel grid appears.
Press
to select a radio channel and
press
to listen.
•
Select
channels and view all channels.
.
menu appears.
.
to display
.
>
>
to exit radio
23
Advertisement
Table of Contents
