Enable one-touch play and one-touch
standby between easylink compliant
devices by following the instructions
in the previous section (see 'Enable or
disable EasyLink' on page 35).
Press
(
).
Press
to select a device with
HDMI connector from your home menu.
Press
Press
to select
and press
»
RC pass-through is enabled on the
selected device with HDMI connector.
Repeat the steps 1 to 5 to disable remote
control pass-through.
•
Easylink compliant device must be connected
to the TV via HDMI connector.
Enable remote control pass-through by
following the instructions in the previous
section (see 'Enable or disable remote
control pass-through' on page 37).
Press
to select a device that has
been enabled to support RC pass-
through and press
Press
following menus for TV or the active
device connected to the TV:
•
Accesses menus that
allow you to change picture, sound
and other TV settings.
•
Displays the clock on the TV
screen.
.
.
to enter.
to access one of the
•
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theatre
system is detected.
•
menu of the CD/DVD/game disc.
•
main menu of the connected device
such as DVD player, HDD recorder,
or game console.
•
content menu of the CD/DVD/game
disc.
Press
to enter or activate your
selection.
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Turns TV speakers
Accesses the root
Accesses the
Accesses the
37