Table of Contents
Advertisement
Press
to select
>
»
Applications provided by the digital TV
service operator appear on the screen.
•
This menu option is available only if the CAM
is inserted and activated correctly.
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
•
The EasyLink-compliant device must be
switched on and selected as the source.
•
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Your TV supports the following Easylink
features :
•
When you connect
your TV to devices that support one-
touch play, you can control your TV and
the devices with one remote control.
For example, when you press 'Play' on
your DVD remote control, your TV
automatically switches to the correct
channel to show the DVD content.
•
your TV to devices that support standby,
you can use your TV remote control to
put your TV and all connected HDMI
devices in standby mode.
•
When you connect your TV to HDMI
CEC compliant amplifier (such as, a
>
.
When you connect
Home theatre system or an AV receiver),
your TV can switch automatically to play
audio from the connected amplifier. To
use one-touch audio, you must map the
audio input from the connected amplifier
to your TV. You can use the remote
control of the connected amplifier or
your TV to adjust the volume.
•
RC key forwarding allows
you to control EasyLink-compliant devices
using your TV remote control.
•
Overrides the settings of
connected devices and uses the settings
of the TV.
•
Do not enable Philips EasyLink if you do not
intend to use it.
Press
(
).
Press
to select
>
.
Select
or
After enabling EasyLink, press play on
your device.
»
The TV automatically switches to the
correct source.
Press and hold
device's remote control for at least three
seconds.
»
The TV and all connected HDMI
devices switch to standby.
>
>
.
on the TV's or
35
Advertisement
Table of Contents
