Table of Contents
Advertisement
Connection to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
As a connecting method varies according to instruments, refer to the
manual supplied with the instrument.
Connect the cable after power is turned off.
Set the 75 /Hi-Z selection switch. If it is a intermediate device, switch it to
Hi-z and if it is final device, switch it to 75 .
(Please refer to the Monitor Manual.)
Connecting to Power
Connect the adapter to the power input connector as shown in the figure
below. Use a DC 12V and 300mA adapter.
(The Adapter is not provided with the Dome Camera.)
VIDEO
VIDEO
75
Hi-Z
75
IN
OUT
IN
INTERIOR DOME CAMERA
Hi-Z
OUT
13
Advertisement
Table of Contents
