Rear Light/Licence Plate Light; Rear Light/Licence Plate Light Replacement - Triumph Tiger Explorer Handbook

Remove the two fixings from the rear of the
lamp unit.
2
cgrb_1
1. Fog lamp
2. Fixings
Pull the lens out of the case.
Disconnect the bullet connector inside the
lamp unit.
Remove the two fixings securing the bulb
retainer and remove the bulb.
2
cgsq_1
1. Connector
2. Bulb retainer
3. Fixings
Maintenance and Adjustment
Installation is the reverse of the removal
process.
1
Use a genuine Triumph supplied bulb as
specified in the Triumph Parts Catalogue.
Always have replacement bulbs installed
by an authorised Triumph dealer.
Rear Light/Licence Plate
Light

Rear Light/Licence Plate Light

Replacement
The rear light unit is a sealed, maintenance
free LED unit. The licence plate light is
integral to the rear light unit.
1
3
Caution
123