Quick Start / Assembly - Bissell PET HAIL ERASER 1650 SERIES Quick Start User Manual

Quick Start Guide
REFER TO PAGE 5 FOR COMPLETE USER GUIDE INSTRUCTIONS, PRODUCT VIEW, AND IMPORTANT SAFETY NOTICES.
Assembly
1
Slide End
of Wand
into top
of base. It
will "Click"
when
inserted
correctly.
"Click"
4
You have the option to store just the
LED Lighted Crevice Tool or both
that and the Pet TurboEraser Tool.
Pick the single tool caddy or double
tool caddy and push hard to slide it
on the base of vacuum.
IMPORTANT REMINDER
Your vacuum came in floor cleaning
mode, to use your tools, be sure to
turn the Vacuum Suction Knob to
align arrow with "hose/tool suction."
See page 9 for further instructions.
Febreze and related trademarks are owned by the Procter & Gamble
Company, Cincinnati, Ohio and used under license by BISSELL Homecare, Inc.
2
Insert end of Hose into vacuum
base by sliding the arms in and
down first. Press down hard on
the bottom tab with both your
thumbs to "click" in.
5
SINGLE
TOOL CADDY
OR
DOUBLE
TOOL CADDY
Press Tank Release
Button and pull
container away from
vacuum.
Remove the yellow
foam filter (non-
Febreze®) and replace
with black Febreze®
filter (included
separately) last. Be
sure black filter faces
out, covering white
mesh filter.
Place dirt container
back on vacuum.
INSTALL OPTIONAL FEBREZE® FILTER
3
Push Cord Wrap in firmly
until you hear "Click".
Wrap power cord around
cord wraps.
Pull tab out on front
of dirt container
and pull handle up
to open.
www.BISSELL.com
2