IMpEllER REplACEMEnT
Replacing the kestrel Impeller
Press only the sides of the impeller when removing and
inserting to avoid damaging the precision hub bearing.
]
Figure 1
.
• Press FIRMLY on the impeller module to remove it.
• Insert the new impeller so the side that has the small
triangle (close to the perimeter) faces the front of the
Kestrel when installed.
26
Figure 1
• Orient one "arm" of the module straight up .
[
Figure 2]. The impeller can be pushed in from either
side.
[
Figure 2
Kestrel