Impeller Replacement - Kestrel 4000 Instructional Manual

IMpELLER REpLaCEMEnt

Replacing the Kestrel impeller
Press only the sides of the impeller when removing and
inserting to avoid damaging the precision hub bearing.
]
Figure 1 .
• Press FIRMLY on the impeller module to remove it.
• Insert the new impeller so the side that has the
small triangle (close to the perimeter) faces the
front of the Kestrel when installed.
Figure 1
• Orient one "arm" of the module straight up .
[ Figure 2]. The impeller can be pushed in from
either side.
[
Figure 2
Kestrel
15