Table of Contents
Advertisement
TARGET sCREEn (COn'T)
Target Range
• Use
or
to highlight "TR. "
• Use
and
to adjust the value.
Target Range Estimator
Range
TR
998m
meters
Estimate
• Use
to highlight "Estimate" and press
enter Range Estimate screen.
• Use
or
to highlight a parameter.
• Use
and
to adjust values for each parameter.
• When all parameters are set, press
• An "Accept" screen will appear, scroll to "Yes" if you
would like to accept values. Use
highlighted option.
Wind Direction & Wind speed
There are two wind speed measurements on the target
screen (WS1 and WS2) for minimum and maximum
wind speed as well as wind direction (WD). You have
Manual mode
• Use
or "WS2. "
• Use
and
parameter.
16
This function estimates the range
of a target based on size, image
and calculated range.
• When "TR" is highlighted, press
button to enter Range screen.
to escape.
to select the
the option to manually adjust the
wind speed and wind direction
values or use the capture feature
to automatically get a reading.
or
to highlight "WD, " "WS1"
to adjust values for each
Capture mode
• In the Target screen, press
"WD, " "WS1" or "WS2" screen.
• Press
to enter into capture mode.
• Face the back of the Kestrel meter directly into the
wind and press
mode. Please ensure Kestrel impeller cover is open.
• The data collected in capture mode will automatically
adjust the "WD, " "WS1, " and "WS2" values in the Target
screen.
*Note: WS1 can never be greater than WS2 value. The
to
WS2 value will automatically adjust to ensure that this
remains true.
Direction of Fire
Direction of Fire (DoF) is an absolute frame of reference
to true north. The value is the direction the gun barrel
is pointing with respect to the values on a compass.
Direction of Fire can be manually adjusted or obtained
using the "Capture" feature.
Manual mode
• Use
or
• Use
and
Capture mode
• When "DoF" is highlighted, press
DoF screen.
• Use
to scroll to "Capture. "
• Press
to enter into the capture mode.
• Face the back of the Kestrel directly toward the target
and press
• The data collected in capture mode will automatically
adjust the DoF value in the Target screen.
*Note: Compass must be calibrated in order to capture DoF.
See p. 7 for calibration steps.
to enter into either the
to start and stop the capture
to ensure that "DoF" is highlighted.
to adjust the value.
to enter the
.
Advertisement
Table of Contents
