Install Channels; Selecting Your Menu Language; Autoprogram - Philips 1EMN26039A User Manual

7 Install channels

The fi rst time you set up your TV, you are prompted to select a menu
language and to install TV and digital radio channels (if available). This
chapter provides instructions on how to reinstall and fi ne-tune channels.

Selecting your menu language

1
Press MENU on the remote control and select [Language].
Picture
Select your menu language.
Sound
Setup
Seleccione el idioma para el menú.
Features
Language
Sélectionnez la langue du menu.
USB
2
Select a language and press OK to confi rm your choice.
3
Press MENU to exit.
EN
24

Autoprogram

Before you install channels, ensure that you are registered with your
cable TV provider and that your equipment is correctly connected.
1
Press MENU on the remote control and select [Setup] >
[Autoprogram].
Picture
Sound
Setup
Features
Language
USB
English
Español
2
Press OK to start the installation.
Français
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation.
If you have forgotten your PIN, reset it as described in 'Changing
your PIN' on page 18.
3
Select [Antenna] or [Cable] and press OK.
•
•
Picture
Sound
Setup
Features
Language
USB
•
4
Follow the on-screen instructions to complete the installation.
Autoprogram
Channel List
Add Channels
Antenna
When [Antenna] is selected, the TV detects antenna signals. It
searches for NTSC and ATSC channels available in your area.
When [Cable] is selected, the TV detects signals supplied
by cable. It searches for NTSC, ATSC, and QAM modulated
channels available in your area.
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
Antenna
Or
Cable
When autoprogramming is complete, the lowest memorized
channel will be displayed.
Back
Antenna
Cable
ANT.IN