Adjusting Volume; Still Mode; Watching Channels From A Set-Top Box; Watching Connected Devices - Philips 1EMN26039A User Manual

Adjusting volume

To increase or decrease volume
Press VOL + / − on the remote control or press VOLUME + / − on
•
the side of the TV.
To mute or unmute sound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again or VOL + / − to recover the original sound.

Still mode

You can pause the image shown on the TV screen.
Press FREEZE to pause the image shown on the TV screen.
FREEZE
• The sound output will not be paused.
• If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except . (standby-On).

Watching channels from a set-top box

To watch channels from a set-top box
1
Switch on the set-top box.
» The picture from your set-top box might appear automatically
on the TV screen.
2
Use the remote control of your set-top box to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2
Use the remote control of your set-top box to select channels.

Watching connected devices

To watch connected devices
1
Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV screen.
2
Use the remote control of the device to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2
Use the remote control of the device to select channels.
EN
13