Changing Picture Format - Philips 1EMN26039A User Manual

Changing picture format

1
Press FORMAT on the remote control.
2
Press Î or ï to select a picture format and press OK to confi rm
your choice.
Summary of picture formats
5 types of display modes can be selected when the broadcasting station
is sending 16:9 or 4:3 video signal. And 3 types of display modes can be
selected for PC input signal.
For 16:9 video signal
[Normal]
[Wide]
Normal
Display a 16:9 picture at its original size.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
Movie Expand
Display a 16:9 picture that is vertically stretched to fi ll the screen.
This only crops out the top of the picture.
Zoom
Display a 16:9 picture at its maximum size without changing its
horizontal and vertical ratio.
Wide
Display a horizontally stretched picture. This crops out the left and
right sides of the picture.
EN
16
[4:3]
[Movie Expand]
[Zoom]
For 4:3 video signal
[Normal]
[Wide]
Normal
Display a 4:3 picture at its original size. Sidebars appear on both
edges of the screen.
16:9
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to fi ll the screen.
Movie Expand
Display a 4:3 picture at a 16:9 size; the picture is stretched more
vertically at the top of the screen. This crops out the top of the
picture.
Zoom
Display a 4:3 picture at a 16:9 size; at its maximum size that is more
vertically stretched to fi ll the screen. This crops out the top and
bottom of the picture.
Wide
Display the picture with its center at the original size and the edges
stretched horizontally to fi ll the screen.
For PC input signal through
[Normal]
[Dot By Dot]
Normal
Display a proportionately stretched picture. Sidebars appear on
both edges of the screen.
Full
Display a picture that is stretched out of proportion to fi ll the
screen.
Dot By Dot
Display a picture in its original size
[16:9]
[Movie Expand]
[Zoom]
input mode
HDMI1
[Full]
.