Watching A Blu-Ray Disc; Switching Audio Mode - Philips 1EMN26039A User Manual

Watching a Blu-ray disc

To watch a Blu-ray Disc
1
Insert a Blu-ray Disc into your player.
2
Press ► (play) on the remote control of the Blu-ray Disc player.
» The Blu-ray Disc might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2
Use the remote control of the Blu-ray Disc player to play the disc.
EN
14

Switching audio mode

This section describes how to switch audio language in digital mode and
how to switch audio in analog mode.
DTV
1
Press SAP to display the currently selected language and the
number of available languages.
English 1/3 English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
•
SAP does not control external audio devices.
•
The information display will automatically disappear in a few seconds.
•
The default setting for audio mode can be fi xed, see [Audio Setting] in 'Changing sound
settings' on page 17.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
SAP English 1/3
When all audio are available
SAP / STEREO
SAP / STEREO
SAP / STEREO
SAP /
When stereo and monaural audio are available
MONO / STEREO
MONO / STEREO
When SAP and monaural audio are available
SAP / MONO
MONO / STEREO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
11.1 11.1
11.1 11
/ STEREO
SAP / MONO
SAP / MONO
STEREO
MONO / STEREO
MONO / STEREO
SAP / MONO
MONO / STEREO