Air Filters Installation - Whynter ARC-14S Instruction Manual

AIR FILTERS INSTALLATION

Your Whynter portable air conditioner is equipped with a washable Pre-Filter and an Activated
Carbon Filter.
The washable Pre-Filter removes large particles such as dust, pet hair and dander.
The Activated Carbon filter is designed to remove smoke and other odors. It is recommended
you replace the Activated Carbon filter every 2-3 months or as needed. Follow the steps below
to install the filters.
WARNING: NEVER OPERATE THE AIR CONDITIONER WITHOUT THE PRE-FILTER
1. Pull up the pre-filter frame
2. Remove the Pre-Filter from the filter frame.
3. Place the Activated Carbon filter on the Pre-Filter.
4. Reattach the filter frame.
5. Insert the assembled filter frame into the unit.
An optional 3M™ Antimicrobial Filter can also be purchased to replace the activated carbon filter. The
3M™ Antimicrobial Filter uses an antimicrobial agent that helps inhibit the growth of mold and mildew on
the filter. This filter is electrostatically charged for enhanced particle capture and retention.
**If you are interested in purchasing optional accessories, please contact support@whynter.com for retail
sales information.
Note: The optional 3M™ Antimicrobial Filter is not washable and should be replaced every 3 months.
11 |
P a g e