Daikin P Series Technical Manual page 10

Outdoor Clearance
If the condensing unit is operated in an atmosphere containing oils (including machine
oils), salt (coastal area), sulphide gas (near hot spring, oil refinery plant), such as
The outdoor unit must be installed in such a way, so as to prevent short circuit of the hot discharged air or
obstruction to the smooth air fl ow. Please follow the installation clearances shown in the fi gure. Select the
coolest possible place where intake air temperature is not greater than the outside air temperature (please
refer operating range).
RN10/15F
More than 50
1200 or
less
Side View
RN20/25/30C, RN35D
Dimension (mm)
Minimum Distance
Note: If there is any obstacle higher than half, of the unit's height
(H), please allow more space than the figure indicated in the
above table.
substances may lead to failure of the unit.
More than 100
A B C
300 1000 300
More
than 100
More than 50
More than 50
Top View
D
500
Application Information
More than 150
More than 50
Top View
More than 150
More than 300
Unit : mm
A
B
C D
H/2
9