Closing - Chrysler PACIFICA 2017 Owner's Manual

140 GETTING TO KNOW YOUR VEHICLE
The key fob and the overhead console button will release
the liftgate when the liftgate is locked. The outside handle
requires the liftgate to be unlocked. If the vehicle is
equipped with Passive Entry, pulling the outside handle
will unlock and release the liftgate, with a valid Passive
Entry key fob within 5 ft (1.5 m) of the liftgate.
Unlock Liftgate Using Passive Entry
NOTE: If 1st Press of key fob Unlocks "All Doors" is
programmed in Uconnect Settings, all doors will unlock with
a Passive Entry handle activation. If 1st Press of key fob
Unlocks "Driver Door" is programmed in Uconnect Settings,
the liftgate will only unlock with handle activation. Refer to
"Uconnect Settings" in "Multimedia" for further information.

Closing

To Close The Liftgate
Grasp the liftgate closing handle and initiate lowering the
liftgate. Release the handle when the liftgate takes over the
closing effort.
To Lock The Vehicle
With a valid Passive Entry key fob within 5 ft (1.5 m) of the
liftgate, pushing the passive entry lock button located to
the right of the outside handle will lock the vehicle.
WARNING!
• Driving with the liftgate open can allow poisonous
exhaust gases into your vehicle. You and your pas-
sengers could be injured by these fumes. Keep the
liftgate closed when you are operating the vehicle.
• If you are required to drive with the liftgate open,
make sure that all windows are closed, and the
climate control blower switch is set at high speed. Do
not use the recirculation mode.