brennenstuhl PM 231 E Operating Instructions Manual page 12

PM 231 E Operating instructions
GB
Display Metering Functions
Repeatedly press the FUNC button (6) to cycle through
the following information: VOLTAGE, AMP, WATT – kWh -
TOTAL PRICE (10, 18).
Press the FUNC button (6) to display the current draw of
the connected appliance in the value fi eld (10) on the LCD,
AMP (11) is displayed in the unit section and the POWER
FACTOR (27, 28).
Press the FUNC button (6) again to display the wattage of
the connected appliance in the value fi eld (10) on the LCD,
WATT (12) is displayed in the unit section and the POWER
FACTOR (27, 28).
Press the FUNC button (6) again to display the power
consumption of the connected appliance in the value fi eld
(10) on the LCD. kWh (13) is displayed in the unit section
and the POWER FACTOR (27, 28).
Press the FUNC button (6) again to display the TOTAL
PRICE (10, 18) and the TOTAL ON TIME (21, 22, 24) in
minutes of the connected appliance.
Press the FUNC button (6) again to display the VOLTac.
(15) and the Hz (26, 27). Hold the FUNC button (6) at
least 2 seconds to display COST/kWh.
If the total load is exceeded MAX OVERLOAD WARNING
(17) will fl ash on the display (2).
31