brennenstuhl PM 231 E Operating Instructions Manual page 11

Operating instructions PM 231 E
GB
Press the SET button (5) again, and the time display
(- : - -) behind ON TIME (24) for the entered price 1 (18)
starts fl ashing. Press SET (5) to fi nish the setting proce-
dure for price 1 if no second price is needed.
To enter a second price (e.g. day/night tariff) also set a
starting point for price 1 fi rst. While the time display is
fl ashing behind ON TIME (24) for price 1 (18) press UP
button (4) to set the day of the week for the starting point
(see previous section). Now press the SET button (5) until
the hour display starts fl ashing and press the UP button (4)
to set the hours for the starting point. Repeat this proce-
dure for the minute display. Finally press the SET button (5)
to fi nish price 1 settings.
Set Cost/kWh (Price 2)
Setting the cost/kWh for price 2 is similar to price 1.
Ensure that at the beginning price 2 (18) is displayed.
Press the FUNC button (6) to toggle the display to show
price 2 (18) before starting the setting procedure with the
SET button (5).
30