Elcometer 456 Operating Instructions Manual page 2

The Elcometer 456 gauge and the miniature probes have been tested in accordance with EEC
regulations governing Electro-magnetic compliance and they meet the required directives.
Note - Gauge readings may be affected if the unit is operated within a radio frequency electromagnetic
strength of greater than 3V/m.
Warning
The Elcometer 456 gauge uses a Liquid Crystal Display. If it is heated above 50° C (120° F) it may be
damaged. This can happen if it left in a car parked in strong sunlight.
© Copyright Elcometer Ltd.2008.
All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a retrieval
system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical,
magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Ltd.
A copy of this Instruction Manual is available for download on our Website via www.elcometer.com/
downloads.
Doc.No. TMA-0259 Issue 05
Text with Cover No: 16859