Invacare orion metro Service Manual page 16

Orion
4.
Press key to decrease value.
5.
Press key to save and enter next page.
Setting battery gauge
This chapter applies for mobility devices with LCD
display.
Setting battery gauge is mandatory when retrofitting
operating console.
Adjust the parameter in battery gauge to suit different types
and sizes of batteries.
AGM battery
(1) big size (2) small
batteries (> size batteries
50 A) (< 50 A,
default)
1.
Press key to increase value.
2.
Press key to decrease value.
3.
Press key to save and enter next page.
Setting wheel diameter
This chapter applies to mobility devices with LCD
display.
Setting wheel diameter is mandatory when
retrofitting operating console.
Set value according to wheel diameter 11", 12", 13", 14" or
15" for correct display of speed.
16
Gel battery
(3) small size (4) big size
batteries (< batteries (>
50 A) 50 A)
1.
Press key to increase value.
2.
Press key to decrease value.
3.
Press key to save and leave setup settings.
Entering setup (LED Display)
This chapter applies for mobility devices with LED
display.
1. Turn key to switch mobility device off.
2.
Press and hold keys.
3. Turn key to switch mobility device on.
Mobility device enters setup mode after two seconds.
LED 2 and LED 8 will flash.
4.
Release keys to enter setup settings.
Setting battery gauge
This chapter applies for mobility devices with LED
display.
Setting battery gauge is mandatory when retrofitting
operating console.
Adjust the parameter in battery gauge to suit different types
and sizes of batteries.
AGM battery
(1) big size (2) small
batteries (> size batteries
50 A) (< 50 A,
default)
Gel battery
(3) small size (4) big size
batteries (< batteries (>
50 A) 50 A)
1608032-A