Starting Call Waiting - Zte f160 User Manual

ZTE F160 User Manual
When unreachable
3. Select one option, press OK Key [Select] and select Activate to register the corresponding service.
4. Enter phone number you want to divert to.
Or press Left Soft Key [Contacts] to select one contact as the number you want to divert to.
5. Press OK Key [OK] to confirm and select which service (All voice calls or All video calls) you want
to divert.
6. After few seconds, the result will be shown to you.
Call divert always
Divert all incoming calls unconditionally.
Call divert when busy
Divert incoming calls when the line is busy.
Call divert when no reply
Divert calls when there is no answer.
Call divert when unreachable
Divert calls when the phone is turned off or the phone is not in an area covered by service network.
Cancelling call divert
When your phone has activated the Call divert function, if you want cancel it, you should do as follows:
1. In standby mode, press OK Key [Menu] to enter main menu.
2. Select Settings > Call > Call divert > Cancel all call diverts, and press OK Key to confirm.
All settings about divert are cancelled.

Starting call waiting

If there is an incoming call while you are on another call, the phone notifies you with a call waiting tone.
It shows the number/name of the waiting call, and this function is a network service.
1. In standby mode, press OK Key [Menu] to enter main menu.
2. Select Settings > Call > Call waiting.
3. Press OK Key [Select] and select Activate to register the corresponding service.
Confidential and Proprietary Information of ZTE CORPORATION 25