After Cleaning Windows - Dirt Devil DD 400 Operating Manual

5 After cleaning windows

5 After cleaning windows
ATTENTION:
Squeegee cloths must be removed and
dried immediately after use and or washed
first and then dried. Otherwise mould and
bacteria may form and the cleaning effect of
the cloths will deteriorate.
5
5
28
The water tank and the parts of the appli-
ance which carry water must also be emp-
tied immediately after use. Otherwise there
is a risk of the water degenerating or acci-
dental water leaks when storing.
1. Remove the use squeegee cloth from the
squeegee head and clean it (Fig. 5/1).
2. Remove the used squeegee lip from the
squeegee head and clean it (Fig. 5/2).
1
3. Release the water tank and remove it from
the window vacuum cleaner (Fig. 5).
4. Hold the water tank over a drain and open
the dirty water tank cover (Fig. 5/3).
5. Rinse out the dirty water tank with tap water
as necessary.
2
None of the components of the window vac-
uum cleaner are dishwasher-safe.
6. Allow all the components which you have
cleaned to dry (at least 24 hours at room
temperature Fig. 5/4).
7. Close the dirty water tank cover (Fig. 5/5).
8. Install the cleaned components again once
3
they are completely dry.
NOTE:
When inserting the water tank, it is impera-
tive that you make sure that both nozzles
(Fig. 1/2 and Fig. 1/4) reach into both
mounts (Fig. 1/14 and Fig. 1/15). Otherwise
you will not be able to securely fasten the
water tank in its console in the window vac-
4
uum cleaner.
24
9. Keep the window vacuum cleaner and the
charger dry, cool and out of the reach of
children.
ATTENTION:
ATTENTION: