Dampening And Cleaning Windows - Dirt Devil DD 400 Operating Manual

4 Cleaning windows

4.2 Dampening and cleaning windows

4
1
ATTENTION:
In case of heavy soiling or coarse particles
of dirt you will need to soak them substan-
tially and pre-clean them with other cleaning
utensils. Otherwise the window vacuum
cleaner may become blocked.
NOTE:
Make sure that you have installed a fresh
squeegee cloth. We recommend that you
use the gentle microfibre cloth (Fig. 2/4 and
Fig. 2/8) or the cloth for coarse soiling
(Fig. 2/5 and Fig. 2/9) in accordance with
the surface being cleaned and the level of
soiling.
1. Point the spray nozzle at the surface being
cleaned (Fig. 4).
2. Actuate the spray button several times
(Fig. 4/1) thus dampening the surface be-
ing cleaned.
3. Allow the mixture to soak in briefly without
letting it dry.
4. Pre-clean the surface with the appliance
switched off using the fitted squeegee cloth
thus removing any adhered dirt.
5. Switch on the window vacuum cleaner at its
On/Off button (Fig. 4/2).
2
- The charging/operating light lights up.
6. Squeegee the surface being cleaned slowly
in strips.
7. Wipe the squeegee lip with a dry cloth after
each strip.
8. Once you are finished with cleaning, switch
the window vacuum cleaner off at the On/
Off button (Fig. 4/2).
- The charging/operating light goes out.
27