Table of Contents
Advertisement
Available languages
Available languages
15.
EMPTYING THE DUST CONTAINER
1. Push the handheld unit release button upwards, lift the handheld unit from main
body.
2. Press the dust container release button and remove the dust container. [7]
3. Lift the filter from the dust container. [8]
4. Turn the dust container upside down over a bin to instantly empty it. [9]
5. Reassemble the handheld unit and return to the cleaner main body.
CLEANING THE FILTER
1. Push the handheld release button upwards, lift the handheld unit from cleaner
main body.
2. Press the dust container release button and remove the dust container.
3. Remove the filter from the dust container and clean.
4. Wash the filter in lukewarm water and leave to dry for 24 hours. Once thoroughly
dry return to the dust container.[10, 11]
5. If required, wash the dust container in lukewarm water. Ensure it is fully dry
before returning to the main body of the cleaner.
6. Reassemble the handheld unit and return to the cleaner main body. [12,13]
NOTE: Do not use hot water or detergents when cleaning the filters. In the unlikely
event of the filters becoming damaged, fit a genuine part replacement. Do not try use
the product without a filter fitted. IMPORTANT: For optimum performance, always
keep your filter clean. We recommend that the filter should be washed at least once
a month.
CHANGING AND CLEANING THE AGITATOR
IMPORTANT: Always switch off the cleaner before changing the agitator.
1. Using a coin turn the lock to the open position. [14]
2. Remove the Agitator cover.
3. Remove the Agitator.
4. Replace with the new Agitator or clean it. This can only fit in one direction. [15]
5. Re- fit the Agitator cover and lock with a coin.
BATTERY REPLACEMENT
For reasons of safety the Lithium-Ion batteries in this cleaner are only replaceable
by a Agency Service engineer. When the batteries fail to maintain charge, please
contact the Agency Customer Service Centre to arrange a replacement.
16.
Advertisement
Table of Contents
