Electrolux ENN28600 User Manual page 12

12 electrolux
Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do these steps.
1. If necessary cut the adhesive sealing
strip and then apply it to the appliance
as shown in figure.
x
2
min.
200 cm
2
x
2. Drill the hinge cover A, as shown in fig-
ure.
Apply the covers A and A1 (in the bag)
in to the intermediate hinge.
A
3. Install the appliance in the niche.
Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge.
A1
2
1