Download Print this page

Electrolux ENN2843AOW User Manual

Hide thumbs


Quick Links

................................................ .............................................



  Summary of Contents for Electrolux ENN2843AOW

  • Page 1 ..................... ENN2843AOW EN FRIDGE FREEZER USER MANUAL...
  • Page 2: Table Of Contents CONTENTS 1. SAFETY INFORMATION ..........3 2.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION In the interest of your safety and to ensure Keep ventilation openings, in the appli- the correct use, before installing and first ance enclosure or in the built-in structure, using the appliance, read this user manual clear of obstruction. carefully, including its hints and warnings.
  • Page 4: Care And Cleaning Do not pull the mains cable. • Do not use sharp objects to remove frost from the appliance. Use a plastic If the power plug socket is loose, scraper. do not insert the power plug. There is a risk of electric shock or fire. •...
  • Page 5: Control Panel

    ENGLISH tains flammable gases: the appli- 1.7 Environment Protection ance shall be disposed according This appliance does not contain to the applicable regulations to gasses which could damage the obtain from your local authorities. ozone layer, in either its refrigerant Avoid damaging the cooling unit, circuit or insulation materials.
  • Page 6: Daily Use Do not scratch or brush corresponding window, to maintain proper functioning. This function stops automatically after 52 hours. 2.5 Door sensor The appliance is equipped with an infrared sensor to detect door open. 3. DAILY USE In the event of accidental defrost- 3.1 Before first use ing, for example due to a power Before using the appliance for the first...
  • Page 7: Helpful Hints And Tips

    ENGLISH 3.7 Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half- shelves can lie over the rear ones. 3.8 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be...
  • Page 8: Hints For Refrigeration Temperature Regulator toward warmer • the freezing process takes 24 hours. settings to allow automatic defrosting No further food to be frozen should be and so a saving in electricity consump- added during this period; tion. • only freeze top quality, fresh and thor- oughly cleaned, foodstuffs;...
  • Page 9: Care And Cleaning

    ENGLISH 5. CARE AND CLEANING CAUTION! • Clean the condenser (black grill) and Unplug the appliance before car- the compressor at the back of the ap- rying out any maintenance opera- pliance with a brush. This operation will tion. improve the performance of the appli- ance and save electricity consumption.
  • Page 10: Defrosting Of The Freezer

    10 The absence of frost is due to the contin- 5.4 Defrosting of the freezer uous circulation of cold air inside the The freezer compartment of this model, compartment, driven by an automatically on the other hand, is a "no frost" type. controlled fan.
  • Page 11: Installation

    ENGLISH Problem Possible cause Solution Water flows on the During the automatic de- This is correct. rear plate of the re- frosting process, frost de- frigerator. frosts on the rear plate. Water flows into the The water outlet is clog- Clean the water outlet.
  • Page 12: Electrical Connection

    12 The appliance must be earthed. The pow- Cli- Ambient temperature er supply cable plug is provided with a mate contact for this purpose. If the domestic class power supply socket is not earthed, con- nect the appliance to a separate earth in +10°C to + 32°C compliance with current regulations, con- +16°C to + 32°C...
  • Page 13: Ventilation Requirements

    ENGLISH • Loosen and remove the lower pin. On the opposite side: • Tighten the lower pin. • Install the lower door. • Tighten the middle hinge. • Install the spacer. • Install the upper door. • Tighten the upper pin. 7.4 Ventilation requirements The airflow behind the appliance must be min.
  • Page 14 14 Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover stops against the kitchen furniture. Push the appliance in the direction of the arrow (2) against the cupboard on the opposite side of the hinge.
  • Page 15 ENGLISH Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in op- posite case. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B).
  • Page 16 16 Disconnect the parts (Ha), (Hb), (Hc) and (Hd). Install the part (Ha) on the inner side of ca. 50 mm the kitchen furniture door. 90° 21 mm 90° ca. 50 mm 21 mm Push the part (Hc) on the part (Ha). Open the appliance door and the kitch- en furniture door at an angle of 90°.
  • Page 17: Noises

    ENGLISH Remove the brackets and mark a dis- tance of 8 mm from the outer edge of 8 mm the door where the nail must be fitted (K). Place the small square on the guide again and fix it with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part (Hb).
  • Page 19: Technical Data

    ENGLISH HISSS! HISSS! SSSRRR! SSSRRR! CRACK! CRACK! 9. TECHNICAL DATA Dimension of the recess Height 1780 mm Width 560 mm Depth 550 mm Rising Time 21 h Voltage 220 V Frequency 60 Hz...
  • Page 20: Environment Concerns

    20 The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. 10. ENVIRONMENT CONCERNS and electronic appliances. Do not dispose Recycle the materials with the symbol appliances marked with the symbol .
  • Page 21 ENGLISH...
  • Page 22 22
  • Page 23 ENGLISH...
  • Page 24