Inspecting The Cylinder Head; Inspecting The Timing System Components - PIAGGIO Liberty 125 Workshop Manual

Liberty 125 - 200 4tempi
020427Y Piston fitting band

Inspecting the cylinder head

- Using a trued bar check that the cylinder head
surface is not worn or distorted.
- Check that the camshaft and rocking lever pin
bearings show no signs of wear.
- Check that the cylinder head cover surface, the
intake manifold and the exhaust manifold are not
worn.
Characteristic
Maximum admitted unevenness: Head check
0.05 mm
Specification
Standard diameter
Standard diameter
Standard diameter

Inspecting the timing system components

- Check that the guide shoe and the tensioner shoe
are not worn out.
- Ensure that the camshaft drive pulley, the chain
assembly and the sprocket wheel are not worn.
- If sings of wear are found, replace the parts. if the
chain, pinion or pulley are worn, replace the whole
assembly.
STANDARD DIAMETER
Desc./Quantity
A Ø 32.5 ÷ 32.525
B Ø 20 ÷ 20.021
C Ø 12 ÷ 12.018
Engine
ENG - 99