PIAGGIO Liberty 125 Workshop Manual page 119

Liberty 125 - 200 4tempi
Engine
- Preassemble the oil seal with the appropriate
tool, positioning the screws
- Place the sheath over the crankshaft
- Insert the tool with the oil seal on the crankshaft
until it comes into contact with the crankcase
CAUTION
ORIENT THE OIL GUARD BY POSITIONING THE CHAIN
HOUSING CHANNEL FACING DOWNWARDS. WHEN THE
POSITION IS REACHED, DO NOT RETRACT THE OIL
GUARD. FAILURE TO COMPLY WITH THIS RULE CAN
CAUSE A WRONG POSITIONING OF THE OIL GUARD
SHEATH.
- Orientate the oil guard by inserting the bracket
which is part of the specific tool.
- Tighten the threaded bar onto the crankshaft as
far as it will go.
ENG - 119