Safety Precautions; Installation; Operation - MF FIRE CATALYST Owner's Manual

Installation


The Catalyst must be properly
installed to prevent house fires.
Please strictly adhere to the
installation instructions.

The Catalyst must be
connected to a listed high
temperature chimney or
approved masonry chimney
with liner.

Do not install in a mobile home

We recommend you use
smoke and CO detectors

Operation


The viewing door and back
panel of the Catalyst must be
shut and latched during
operation.

Do not touch the Catalyst
while hot. Young children
should be supervised while
the Catalyst is in use.

Never use gasoline, gasoline-
type lantern fuel, kerosene,
charcoal lighter fluid, or
similar liquids to start or
"freshen up" a fire in this
stove. Keep all such liquids
well away from the stove
while it is in use.

This wood heater has a
manufacturer-set minimum
5 | Page

Safety Precautions

Catalyst Owner's Manual | © MF Fire 2017

Contact your local
building officials to obtain
information on any local
wood stove installation
requirements.

Carefully route all power
cords through to avoid
contact with hot stove
surfaces.

Do not connect to or use
in conjunction with any air
distribution ductwork
unless specifically
approved for such
installations

Never obstruct airflow
through the inlet vents or
exhaust vents

The Catalyst has been
designed for the burning
of cordwood only. Do not
attempt to burn any other
type of fuel in the
Catalyst.

Keep all flammable
objects (fabrics, paper,
wood, etc.) at least 1 yd
(1 m) from the front of the
Catalyst.

Do not use chemicals or
fluids to start the fire.