Western Digital My Cloud PR2100 User Manual page 84

Jumbo Frames
FTP Access
AFP Service
MY CLOUD USER MANUAL
Jumbo frames are large IP frames used to increase performance over
supported networks. Select the Jumbo Frame option for your network
from the pull-down menu, then click Apply.
Note: All devices on your network (e.g., router, computer) must support and
be configured for this option in order to maximize performance.
File Transfer Protocol (FTP) enables the transfer of data from one
computer to another through a network.
To enable FTP Access:
1. Click the toggle button to ON.
2. Review the Note about Shares settings, then click OK.
3. Click Configure.
4. On the FTP Settings screen, enter the following information:
• Maximum Users: From the drop-down menu, select the
maximum number of users you'd like to have FTP access.
• Idle Time: Enter the amount of time, in minutes, you'd like the
FTP to be idle before it times out.
• Port: Enter the port to be used for FTP access.
• Flow Control: Select either Unlimited or Customize.
If you select Customize, enter a Flow Control value.
5. Click Next.
6. In the Passive Mode field, select either Default or Customize. If
you select Customize, enter Passive Mode values.
7. Select the check box if you'd like to report external IP in PASV
(Passive) mode:
Click Get IP
• to enter the External IP address.
• Click Next.
8. Enter the following information:
Client Language:
•
menu.
TLS
• : Select the Transport Layer Security (TLS) check box next to
either Implicit TLS or Explicit TLS connections, if applicable.
FXP
• : To enable File eXchange Protocol (FXP), click the toggle button
ON
to .
9. Click Next.
10. Enter any IP addresses that you want to block from FTP access.
then select either Permanent or Temporary from the drop-down
menu. Click Apply to save your entries.
11. Click Finish.
Apple File Protocol (AFP) Service is automatically enabled if you are set
up for Time Machine backups.
• To enable/disable AFP Service, click the toggle button.
WARNING!
Mounting or ejecting a USB drive while performing an
NFS or AFP file transfer will interrupt the file transfer
process.
CONFIGURING SETTINGS
Select the client language from the drop-down
78