Handling And Operation; Operating Components - Silvercrest SND 3600 A2 Operating Instructions Manual

Operating components (see fold-out pages)
GB
IE
2
3
4
5
6
7

Handling and operation

In this chapter you receive important information for the handling
and operation of the device.
Insert the negative strip
♦ Release the fastener on the front of the fi lm holder
the holder.
♦ Insert the fi lm strip, correctly orientated, into the holder. Ensure
that holes of the negative strip are placed on the corresponding
retaining tabs on the holder, so that the negative strip can not
move.
♦ Close the holder making sure that the cover locks into place.
Inserting slides
♦ Place the slides, with the sides the right way round, into the
intended slot of the slide magazine
♦ First guide the slide magazine
leading, into the insert slot
By means of the slider, located laterally on the slide magazine
slides contained in the slots are pushed individually into the scanner.
14
LED PWR
SCAN button
Insert slot for the negative or slide magazine
USB connection cable
Film holder
Slide magazine
Cleaning brush
.
6
, with the viewing window
6
3 .
and open
5
, the
6
SND 3600 A2