Ir Learning Function - TechniSat AudioMaster BT Operating Instructions Manual

English

IR learning function

the AudioMaster Bt can learn the infrared code of your tV remote control and therefore allows you to control the functions of the sound-
bar and tV device via one remote control. You can allocate the instructions for the soundbar to any key of the tV remote control. When
choosing a key make sure that the instructions for the soundbar do not conflict with the tV device. We recommend that you deactivate
the internal loudspeaker of the tV device once the soundbar is connected.
Hold the tV remote control in position.
1
switch the soundbar on.
2
Press and hold the "On/standby" key of the soundbar
3
remote control for approx. 5 seconds.
the display shows a flashing
4
Press the chosen function on the AudioMaster Bt
5
remote control e.g. "Volume +".
Now the display shows the chosen function, e.g.
6
Within 20 seconds press the key you wish to allocate
7
to this function on the tV remote control.
Once this has been successfully allocated the display
8
will show and you can continue with the
O K
programming of the next key function, e.g. "Volume –".
if the display shows
F A I
9
has failed and you should repeat steps 5 to 8.
38
.
I R L
.
v
this means the allocation
ON ON MUTE MUTE
STANDBY STANDBY
STEREO STEREO BASS BASS
SURROUND SURROUND TREBLE TREBLE
Exit menu
Press and hold the "On/standby" key again for
longer than 5 seconds to exit the "iR learning
BLUETOOTH BLUETOOTH
PAIRING PAIRING
function" menu.
if the soundbar does not receive any input instruc-
tions from the remote control within a period of
60 seconds the menu navigation returns to normal
mode automatically.
tV remote control