Connection - TechniSat AudioMaster BT Operating Instructions Manual

English

Connection

Please ensure that all electrical components are switched off before connecting. Your AudioMaster Bt has three optional inputs. in principle it is
enough to connect one of these inputs to your tV and all further devices to your tV. to achieve the best possible sound we recommend that you
connect your satellite receiver, Blu-Ray or dVd player directly to the AudioMaster Bt. the following options are possible, depending on the type
and fittings of the source used:
TV – Digital input (optical)
Modern tV devices have an optical audio output (toslink). Connect this with the in-
put marked "tV" on the AudioMaster Bt. this connection guarantees optimal signal
transmission and best sound quality.
Important: Remove protective caps from optical cable.
DVD – Digital input (coaxial)
to transmit the dVd sound signal connect the digital coaxial output of your Blu-Ray
or dVd player with the jack marked "dVd" on the AudioMaster Bt. to transmit the
picture signal your dVd player must also be connected to the tV. the input marked
"dVd" on the AudioMaster Bt can be selected if your tV does not have an optical
output.
AUX – Analogue input
if your tV only has an audio output marked "Pre-Out" then connect it using the
shielded stereo RCA cable plugged into the analogue input on the AudioMaster Bt
marked "AuX". Otherwise this input can be used to connect video recorders or game
consoles.
SUB – Analogue output
use this output when you want to connect an external active subwoofer. suB Out
is not active in the basic setting and needs to be activated using the remote control.
see page 36 "extended functions".
32
TV DVD AUX
TV DVD AUX
DIGITAL MOVIE
SUB