Tuner Display - Jedia JPA-1060 Operating Instruction

T
UNER CONTROLS
2
1
1. TUNER ON SWITCH
This switch is used for supplying the power to tuner and display.

2. TUNER DISPLAY

You can confirm the frequency of tuner through this display.
3. BAND SELECTOR FM, AM
This switch is user for selecting FM1, FM2 or AM.
4. UP AND DOWN SWITCH
When these switches are pressed one time, FM/AM frequency is up or down with one step, and in case of pressing over
2 seconds, the mode will change to "Auto scan".
5. PRESET SWITCH
These switches have be changed 6 kinds address form 1 yo 6, per each band.
If you want memorizing the broadcasting frequency press the switch over 2 seconds.
6. TUNER VOLUME
You can adjust the volume of FM or AM radio signal.
AM/FM
FM/AM TUNER
ON
1 2 3
4 5 6
0
LEVEL
3
4
10
6
5
4