Related Manuals for Panasonic WV-CPR460
Summary of Contents for Panasonic WV-CPR460
-
Page 1: Operating Instructions
Colour CCTV Cameras Operating Instructions WV-CPR460 Model No. WV-CPR464E (Lens : option) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 2 ENGLISH VERSION For U.K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- FULLY. WARNING CAUTION THIS APPARATUS MUST BE EARTHED RISK OF ELECTRIC SHOCK DO NOT OPEN IMPORTANT The wires in this mains lead are coloured in accordance with the following code.
-
Page 3: Table Of Contents
We declare under our sole responsibility that the product to CONTENTS which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. PREFACE ..............4 Wir erklären in alleiniger Verantwortung, daß das Produkt, auf FEATURES .............. -
Page 4: Preface
PREFACE Panasonic's WV-CPR460 (WV-CPR464E) series colour horizontal pixels (picture elements), and digital signal digital camera introduces a new level of high picture processing LSIs. This model offers cutting-edge tech- quality and high resolution through the use of a 1/3- nology for advanced video surveillance. -
Page 5: Precautions
90 %. The input power source is 220 V to 240 V AC 50 Hz for WV-CPR460 4. Do not use strong or abrasive detergents when and DC 12 V/AC 24 V for WV-CPR464E. -
Page 6: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS <WV-CPR460> RS485 220-240V ~ 50Hz VIDEO OUT GEN-LOCK Super Dynamic LOCK <WV-CPR464E> RS485 DC 12V AC 24V VIDEO OUT Hi-Z-G/L 75Ω RS485 Hi-Z- LINE TERM GEN-LOCK 4-LINE-2-LINE Slide the panel to the left until it locks. - Page 7 q Auto Iris Lens Connector i Up Button (J) This connector is used to connect the auto iris lens This button is used to move the cursor upward. It with a 4-pin male connector supplied as a stan- is also used to select items in the CAM SET UP dard accessory (Part No.
- Page 8 !3 Half-Duplex/Full Duplex Selection Switches !8 AC/DC Compatible Input Terminal (2-LINE-4-LINE) (DC 12 V IN/AC 24 V IN) These triple switches are used to select either This terminal is for connecting the 12 V DC or 24 V Half-duplex (left side) or Full-duplex (right side) for AC power supply cord.
-
Page 9: Connections
CONNECTIONS A. WV-CPR460 (220 V to 240 V AC 50 Hz) Resistance of copper wire [at 20°C (68°F)] 1. Plug the AC power cord (supplied as standard Copper wire accessory) into the AC Inlet Socket. size (AWG) (0.22 mm ) (0.33 mm ) (0.52 mm... -
Page 10: Video Cable
2. 24 V AC Power Supply Video Cable Connect the power cable to the AC/DC compatible 1. It is recommended to use a monitor whose resolu- input terminal on the rear panel of the camera. tion is at least equal to that of the camera. 2. -
Page 11: Rs485 Setting
RS485 Setting RS485 Terminal Control data is transmitted and received to and from Follow the procedures as below. other peripherals. 1. Slide the panel to the left until it locks. 2. Set RS485 Termination Switch to LINE TERM for Notes: the furthermost camera from the RS232C/RS485 •... -
Page 12: System Connection
A) Single Camera Connection (RS485 Interface B) Daisy-chain Connection (RS485 Interface Model/Full Duplex, Half Duplex) Model/Half Duplex) SIGNAL MONITOR MONITOR QUAD UNIT SIGNAL DATA DATA WV-CPR460 Super Dynamic Super Dynamic LOCK LOCK Set the RS485 Termination RS485/ WV-CPR460 Switch to Hi-Z. RS232C RS485/... -
Page 13: Focus Or Flange-Back Adjustment
FOCUS OR FLANGE-BACK ADJUSTMENT The following adjustment should be made by qualified Focusing of CS-mount lens service personnel or system installers. Focusing of 1. Loosen the screw on the side of the camera. C-mount lens 2. Turn the flange-back adjusting ring to the desired Flange-back position. -
Page 14: Mounting The Lens
Installation of Auto Iris Lens Connector Mounting the Lens Install the lens connector (YFE4191J100) when using a Caution: video drive ALC lens. Before you mount the lens, loosen the screw on The installation should be made by qualified ser- the side of the camera, and rotate the flange-back vice personnel or system installers. - Page 15 Caution for Mounting the Lens The lens mount should be a C-mount or CS-mount (1”- 32UN) and the lens weight should be less than 450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by using the supporter. The protrusion at the rear of the lens should be as shown below: C-mount: Less than 13 mm (1/2”)
-
Page 16: Installation Of Camera
INSTALLATION OF CAMERA • Mounting from the top Remove the mount adapter from the bottom of the camera by removing the two fixing screws. Attach the mount adapter to the top as shown in the dia- gram, then mount the camera on the mounting bracket. -
Page 17: Setup
SETUP 1. CAMRA SETUP MENU 2. SETUP OPERATION This camera utilizes a user setup menu that is dis- This camera utilizes a user Setup menu (CAM SET UP played on-screen. or RS485 SET UP) that is displayed on the monitor. To set items on these menus, use the following buttons on the side panel. - Page 18 • Editing the RS485 and CAM SET UP Menu Left Button (L): Moves the cursor to the left. Use this button to select or adjust the parameters of the Important Notice: selected item. The parameter changes each time • When the SET UP DISABLE appears on the bottom this button is pressed.
- Page 19 To edit the SET UP menu (Change settings), use J • Editing the RS485 SET UP Menu and K or L and M to move the cursor to SET UP You can remote control this camera by using a speci- DISABLE in the bottom line.
- Page 20 Baud Rate Setting Stop Bit Setting This item is lets you select the transmission speed for This item lets you select the number of stop bits for RS485 communication. (BAUD is the unit of bit per sec- RS485 communication. ond.) 1.
- Page 21 Alarm Data Setting • Installation of Software for RS485 Communi- This item lets you select the way of transmitting the cation alarm data for RS485 communication. 1. Insert the Install Disk 1 to the C drive. 1. Move the cursor to the ALRAM DATA. 2.
-
Page 22: Setting Procedures
SETTING PROCEDURES 4. After selecting the character, press I. 1. Camera Identification (CAMERA ID) Setting selected character appears in the editing area. (The pointer in the editing area moves to the right You can use the camera identification (CAMERA ID) to automatically at this moment.) assign a name to the camera. - Page 23 ELC: If you use a fixed or manual iris lens, select this parameter. 1. Move the cursor to the ALC/ELC parameter. 2. Select ALC or ELC. WV-CPR460 2-1. ALC Mode with SUPER-D2 ON Super Dynamic2 Function (SUPER-D2) The important object in a scene is usually placed in the 2.
- Page 24 1. Move the cursor to the SUPER-D2 parameter and select OFF. (When you select ELC, SUPER-D2 is ** ALC CONT ** not available.) The item MASK SET appears on the BACK LIGHT COMP menu. SUPER-D2 MASK SET LEVEL ...I..** ALC CONT ** BACK LIGHT COMP SUPER-D2 MASK SET...
- Page 25 5. After masking is completed, press I for 2 sec- 3. Move the cursor to the area where backlight is bright and press I to mask that area. The mask onds or more. The ALC CONT menu appears. turns to white. (When the cursor is moved on an 6.
- Page 26 3. Shutter Speed Setting (SHUTTER) 4. Gain Control Setting (AGC ON/OFF) Note: When ELC is selected for ALC/ELC on the CAM You can set the gain (brightness level portion of an SET UP menu or ON is selected for SUPER-D2 on image) to automatic level adjustment (ON) or fixed the ALC CONT menu, this item is not available.
- Page 27 5. Electronic Sensitivity Enhancement Notes: • When ON is selected for SUPER-D2 in the ALC (SENS UP) CONT menu, FIX is not available for this item. There are two modes for SENS UP. • When you select AUTO for SENS UP and ON for AUTO: If you select X10 AUTO, for example, the SUPER-D2, the SENS UP function has priority so sensitivity is raised automatically to X10 max.
- Page 28 6. Synchronization Setting (SYNC) Important Notice: 1. The priority for the sync modes is as follows: You can select internal sync mode (INT) or line-lock 1. Multiplexed Vertical Drive (VD2) (Highest pri- mode (LL). Additionally, this model accepts the VBS ority) signal (colour composite video or blackburst signal) 2.
- Page 29 7. The line-lock mode has a submenu for line-lock 4. After confirming that the cursor is on EXT (VBS), vertical phase adjustment. If the camera installa- press . The phase adjustment menu appears tion is relocated, check the vertical phase adjust- on the monitor.
- Page 30 10. Press L or M to match the chroma phase of Notes: • When the “I” cursor reaches the “+” end, it the camera’s video signal, when observed at the jumps back to “–” . At the same time, SC output of the special effects generator (SEG) or COARSE is incremented by one step to Switcher, as closely as possible to the colour of...
- Page 31 6-2. VS Gen-lock Mode (EXT (VS)) 6. Set the oscilloscope to the horizontal rate and expand the horizontal sync portion on the oscillo- 1. Move the cursor to the SYNC parameter and scope. select INT. 7. Move the cursor to H PHASE. 2.
- Page 32 6. Press L or M to match the vertical phase for 6-3. Line-lock Sync Mode (LL) both video output signals as closely as possible. Note: The line-lock (LL) sync mode is not available (COARSE adjustment can be incremented in 16 when the camera operates on DC power.
- Page 33 • To reset COARSE and FINE to the values pre- 3. When the scene is dim. set at the factory, press L or M simultane- In these cases, select the AWC mode. ously. COARSE and FINE adjustments are Move the cursor to the WHITE BAL parameter and preset at the factory to zero-crossing of the select ATW.
- Page 34 Note: In case that the white balance is not set, the Fine Adjustment for AWC (ATW) Manually PUSH SW Is being highlighted. You can add the detailed setting for white balance set- ting manually. 4. When you want to adjust the white balance manu- 1.
- Page 35 8. Motion Detector Setting (MOTION DET) 4. Move the cursor to the ALARM parameter and select ON or OFF to set the alarm for DISPLAY The motion detector detects the moving objects in the MODE. scene by monitoring changes in brightness level. You Note: When the system controller WV-RM70, WV- can select the level of sensitivity for motion detection.
- Page 36 Therefore, when the camera is not used in a Move the cursor to RET on the bottom line of the CAM Panasonic Intelligent CCTV System select OFF to SET UP menu and press L or M simultaneously prevent the above from occurring.
- Page 37 10-2. Chroma Level Setting (CHROMA GAIN) 1. Move the cursor to the CHROMA GAIN parameter. 2. While observing the vectorscope or colour video monitor, move the “I” cursor to adjust the chroma level. 10-3. Aperture Gain Setting (AP GAIN) 1. Move the cursor to the AP GAIN parameter. 2.
-
Page 38: Specifications
–10 °C to +50 °C (14 °F to 122 °F) Ambient Operating Humidity: Less than 90 % Power Source and WV-CPR460: 220 V to 240 V AC 50 Hz, 5.6 W Power Consumption: WV-CPR464E: 24 V AC 50 Hz, 5.2 W... -
Page 39: Standard Accessories
Weights and dimensions indicated are approximate. Specifications are subject to change without notice. STANDARD ACCESSORIES Body Cap..............1 pc. ALC Lens Connector (YFE4191J100)......1 pc. AC Power Cord (only WV-CPR460/G) ......1 pc. Floppy Disk..............2 pcs. OPTIONAL ACCESSORIES Lenses : WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3 WV-LA908C3,... - Page 40 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ N0600-2042 V8QA5550CN Printed in Japan N 19 2001 © Matsushita Communication Industrial Co., Ltd. All rights reserved. Inprimé au Japon...