Panasonic WV-CPR460 Operating Instructions Manual page 7

q Auto Iris Lens Connector
This connector is used to connect the auto iris lens
with a 4-pin male connector supplied as a stan-
dard accessory (Part No. YFE4191J100).
w Focus Fixing Screw
e Flange-back Adjusting Ring
This ring is used to adjust the back focal length or
picture focus. Rotate this ring clockwise for a C-
mount lens or counterclockwise for a CS-mount
lens.
r Lens (Option)
t Camera Mounting Screw Hole
This hole is used to mount the camera onto a
mounting bracket.
y Down Button (K)
This button is used to move the cursor downward.
It is also used to select items in the CAM SET UP
menu.
u Left Button (L)
This button is used to move the cursor to the left.
It also selects the mode and can be used to adjust
some levels.
i Up Button (J)
This button is used to move the cursor upward. It
is also used to select items in the CAM SET UP
menu.
o Right Button (M)
This button is used to move the cursor to the right.
It also selects the mode and can be used to adjust
some levels.
!0 Set Button (I)
This button is used to activate an item selected in
the CAM SET UP menu.
!1 Gen-lock Termination Switch (Hi-Z, G/L 75 Ω)
Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set
this switch to 75 Ω.
!2 RS485 Termination Switch
(Hi-Z – RS485 LINE TERM)
This switch is used to terminate the RS485 termi-
nal.
Normally keep it in
RS485 LINE TERM
position.
-7-
Hi-Z – RS485
LINE TERM