Auto Mode; Dmx Mode - Evolite MOVING BEAM 1R User Manual

8
9
10
11
12
13
14
----System
--System Errors(no error)
--Total Fixture Hours
--Partial Fixture Hours
--Total Lamp Hours
--Partial Lamp Hours
----Advance --Sensor Monitor
--Reset Calibration
--Zero Point Correction ON/OFF
--Lamp Life Hours
--Lamp Hours Clear
o Auto Mode
Auto mode is selected in the main menu.
The MOVING BEAM 1R provides 4 Auto modes:
1- Sound Auto Mode : Internal programs will be processed with the music detection ( built-in microphone)
4- Auto Modes : internal program will be processed automatically .
o DMX Mode
DMX mode is selected in the main menu (make sure fixture is not in Auto Mode).
You can control the fixtures individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
The MOVING BEAM 1R provides 14 DMX channels:
Value
1 0-255
2 0-255
3 0-255
4 0-255
5 0-255
252-255
239-251
226-238
6
213-225
208-212
108-207
104-107
4-103
0-3
MOVING BEAM 1R Manual Ver. 1.00
COLOR
GOBO
FOCUS
PRISM
PRISM ROTATION
RESET (sure to reset?
Ok/cancel)
LAMP POWER(on/off)
--Firmware Version
--DMX Monitor
Pan/Tilt/Color/Gobo/Focus/Dimmer/Prism Calibration
Pan 0-100%
Pan fine 0-100%
Tilt 0-100%
Tilt fine 0-100%
Pan/Fine Speed Fast -> Slow
Strobe/Shutter
Random Strobe(Fast)
Random Strobe(Medium)
Random Strobe(Slow)
Pulse: Slow -> Fast
Strobe: Slow -> Fast
Function
Open
Open
Open
Close
st
DMX channel).
Page 15