Table of Contents
Advertisement
PREMIER QUATRO ZT-TSRI Installation Manual
4.4.4 Miscellaneous
During an
alarm
recipients. The parameters we must configure are:
Enable SMTP Server authentication: Some mail servers may need authentication (for
example, Gmail). If so, this option must be activated and you must indicate the User
and Password that the repeater will use (e.g. if you are using Gmail, it must match
your Gmail User and Email password).
Mail Server SMTP: Input the SMTP server information given to us by the server
(smtp.gmail.com for Gmail).
User: The username of the email address that you are using for the repeater.
Password: The password of the email address that you are using for the repeater.
TLS Encryption: Activate this if your email server uses it (with Gmail it should be
activated).
Email destination in Alarms: Set the destination email address of
more than one, separate with commas).
Email destination in Faults: Set the destination email address of
than one, separate with commas).
Panel Address: The address of the panel connected.
4.5 User Levels
The Repeater has 3 user levels:
• Level 1: No password. No access to perform actions
or to change configuration settings.
• Level 2: Password default 1234. Allow you to
perform the following actions: RESET, START
SOUNDERS, STOP SOUNDERS and SILENCE BUZZER.
• Level 3: Password default 4321. It allows access to the configuration of the repeater as well as
configuration of zones.
(Changing these passwords is done through the repeater display's configuration menu)
4.6 Configuration of Zone maps, Drawings and Images
•
Zones that are in fault/fire can be shown on screen via
maps, drawings and images.
•
These maps, drawings and images can be imported into
the repeater via its Web Server.
•
On the repeater main screen select the settings icon.
•
Enter password (default 4321) level 3.
•
Select the Zones/Plans tab.
Doc No: GLT-281-7-1
and/or fault, the repeater has the ability to send an email to one or more
Issue: 1.1
Alarm
Fault
Author: TE
Firmware Version: 2_0z3
events (If
events (If more
9
DATE: 16/11/2016
Advertisement
Table of Contents
