CanadianSolar CS6A-P Installation Manual

CanadianSolar CS6A-P Installation Manual

Hide thumbs Also See for CS6A-P:

Advertisement

Quick Links

INSTALLATION MANUAL

OF STANDARD SOLAR
MODULES (IEC)
For professional use only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS6A-P and is the answer not in the manual?

Questions and answers

Summary of Contents for CanadianSolar CS6A-P

  • Page 1: Installation Manual

    INSTALLATION MANUAL OF STANDARD SOLAR MODULES (IEC) For professional use only...
  • Page 2: Table Of Contents

    GENERAL INFORMATION GENERAL INFORMATION INSTALLATION MANUAL DISCLAIMER LIMITATION OF LIABILITY SAFETY PRECAUTIONS MECHANICAL / ELECTRICAL SPECIFICATIONS UNPACKING AND STORAGE MODULE INSTALLATION MODULE WIRING GROUNDING MOUNTING INSTRUCTIONS MOUNTING METHOD: BOLTING MAINTENANCE | 11 | 11 AMENDED EDITIONS AND DATES EN-Rev IM/IEC-AM-EN/3.6 Copyright © March 2017. Canadian Solar Inc.
  • Page 3: General Information

    This manual is only valid for the module types CS6A-P, CS6A-M, CS6V-P, CS6V-M, CS6P-P, and GENERAL SAFETY CS6P-M, CS6K-P, CS6K-M, CS6X-P, CS6X-M, CS6K-MS, CS6V-MS, CS6A-MS, CS6U-P and CS6U-M. · All installation work must comply with applicable Please retain this manual for future reference.
  • Page 4: Mechanical / Electrical Specifications

    Installation Manual Annex ( Section Annex C: backsheet is torn. Module Specifications) on www.canadiansolar.com. Main electrical characteristics at STC are also stated · The PV module does not contain any serviceable parts. on each module label. Please refer to the datasheet Do not attempt to repair any part of the module.
  • Page 5: Unpacking And Storage

    This nameplate specifies the model type, as modules under any circumstances. Localized heavy well as the main electrical and safety characteristics loads may cause severe micro-cracks at cell level, of the module. which in turn may compromise module reliability. www.canadiansolar.com...
  • Page 6: Module Installation

    · Exposing modules to salt (i.e. marine environments) MODULE INSTALLATION or sulfur (i.e. sulfur sources, volcanoes) incurs the risk of module corrosion. PRECAUTIONARY MEASURES AND · Failure to comply with these instructions will void GENERAL SAFETY Canadian Solar Inc. warranty. ·...
  • Page 7: Module Wiring

    If the measured open circuit voltage (Voc) and the racking system. short-circuit current (Isc) differ substantially from the specifications, this indicates that there is a wiring fault. · Do not place connectors in locations where water could easily accumulate. www.canadiansolar.com...
  • Page 8: Grounding

    · Although the modules are certified to Safety Class Alternative Grounding Methods) on the website II, we recommend that they are grounded and that (www.canadiansolar.com). It is not possible to use module installation should comply with all local standard grounding methods for certain module electrical codes and regulations.
  • Page 9: Mounting Method: Bolting

    17~23 Nm (12.5~17.0 ft-lbs) respectively for M6 Mounting Methods) on our website (www. (1/4”-20) and M8 (5/16”-18) coarse thread bolts, canadiansolar.com). For information about depending on bolt class. In areas with heavy other installation hardware, please contact your wind loads, additional mounting points should local representative.
  • Page 10 Uplift load ≤ 2400 Pa Uplift load ≤ 2400 Pa Downforce load ≤ 5400 Pa Downforce load ≤ 2400 Pa Compatible module type: CS6A-P, CS6A-M, CS6A- Compatible module type: CS6A-P, CS6A-M, MS, CS6P-P and CS6P-M CS6P-P, CS6P-M and CS6A-MS Bolting on long frame side using four Bolting on long frame side using four innermost innermost mounting holes.
  • Page 11: Maintenance

    · Rev 3.4 was amended and released in Mar, 2016. · Rev 3.5 was amended and released in June, 2016. · Rev 3.6 was amended and released in Mar, 2017. CANADIAN SOLAR INC. 545 Speedvale Avenue West, Guelph, Ontario, Canada N1K 1E6 www.canadiansolar.com www.canadiansolar.com...

Table of Contents